Many people are faced with the problem of a short wireless network range, which greatly complicates the use of tablets, smartphones and other devices connected to the network. Such situations arise in apartments, offices and other premises. Buying a second one will not change the situation, because it requires a free Internet cable. Therefore, you need to know how to connect a router through a router and whether it is possible at all. It is advisable to choose a second router to connect from the same company as the main one. This way you will not be affected by connection incompatibility issues.

Connection methods

Of course, connecting one device through another will increase the scale of network access. You can connect the router via the router in two ways:

• via cable;
• via a wireless network.

Both methods are quite easy. Choose the one that is more practical for you.

How to connect a router to a router via cable?

This method is the easiest. The only caveat is that the routers must be nearby. Let's find out how to connect router to router via cable. To do this you must:

1. Purchase a UTP cable of the required length. On both sides there are special plugs for connectors in routers.
2. We insert one end of the cable into the router, on which the wireless network is already connected to the “Internet” connector.
3. We insert the second end of the cable into the LAN connector on the second router marked Lan2.
4. We go to the “Network and Sharing Center” through the control panel.
5. Click “Local Area Connections”, then call up properties.
6. Select the connection type “Dynamic”.
7. Then set up your WiFi connection network as usual.
8. Save the settings and reboot the main router.

This connection option may not work due to a conflict in device addresses. Therefore, let's consider another option for how to connect two routers via cable:

1. We connect the device ports with a cable.
2. In the connection properties, disable the DHCP server.
3. In the “Local Network” section, change the IP address of the main router to the second one.
4. Save the settings and restart the routers.

How to connect a router to a router via WiFi?

This method of network expansion is more correct. To do this, WDS technology was installed in the routers, which allows you to connect the router through a second router. Each router is a station of this technology and must be properly configured to connect with other devices. If you do everything correctly, then the question of how to connect a router to a router via WiFi will be resolved fairly quickly.

First, make sure that your router model is capable of connecting via WDS. You can find out about this on the model manufacturer’s website. The router that connects becomes a repeating device. Set it up using these steps:

A notification about network distribution and connection will appear on the screen. Check for a wireless network at other scales and connect. If there were no problems, then you were successfully able to connect the router through a second router and can use the Internet. If you were unable to do this, then turn off the routers completely, reset the settings and reconnect. Contact the manufacturer's website for help, because new router models have some deviations from the usual schemes and their own nuances.

Hello, dear readers! I just remembered that someone once asked me in the comments how to connect two routers via a network cable and make sure that the Internet from the first router is transmitted via cable to the second router. And he, in turn, will distribute the Internet via Wi-Fi.

The author of the comment seemed to need to run a cable from the house to the garage and install a router in the garage that would distribute the Internet via a wireless network. The main device seemed to be an ADSL modem without a Wi-Fi module, but with a LAN connector to which you can connect a router.

Of course, if both devices have a Wi-Fi wireless module, then you can. But, when configuring routers in bridge mode (especially from different manufacturers), a lot of problems may arise, or nothing will work out at all.

So, we have a main device on which the Internet is already configured and everything works. This could be a router, modem, etc. We need to connect another router (via LAN) to this main thing.

On the first device we don’t touch anything and don’t go into the settings. The main thing is that the main router distributes IP automatically (DHCP is enabled), which it most likely does. To make it clear to you, my main one is Asus.

On the device that we want to connect (mine is TP-Link), I advise you to reset the settings to factory settings. This is necessary in order to delete all settings that may have already been made to it. They can interfere with our setup of our circuit. You can read about how to do this in the article.

We need a crimped network cable. I wrote about how to crimp such a cable in the article. If you are not sure that you will make it, or simply don’t want to do it, then go to any (well, almost any) computer store and ask to crimp the length of the network cable you need. Pre-measure the distance between the devices that we will connect.

Everything is ready, let's get started :).

Connecting devices

Connect one end of the cable to the main router (from which we will get the Internet). Connect to LAN connector, he yellow .

We connect the second connector to the second device in WAN connector, he blue.

The LAN connection indicator on the first device should light up (computer icon, usually one of four). And on the second router the WAN connection indicator should light up. Like this:

Have you connected? Great!

Setting up routers

As I wrote above, there is no need to configure the main device (but if our scheme does not work, you can check the settings).

There is almost nothing to configure on the second device. Just check that the settings indicate to receive an IP automatically. On TP-Link this is done like this:

Go to the router settings and go to the tab Network – WAN.

Check to see if it's the opposite WAN Connection Type was established Dynamic IP. If not, then install it.

If you did everything correctly, information should appear next to IP Address, Subnet Mask and Default Gateway (as in my screenshot below). This means that the connection to the main router is established and everything should work.

Setting up a router is not an easy procedure, but we are ready to help you understand all its intricacies. Just read the instructions below carefully, and in just a few minutes you can easily set the parameters you need and get started!

#1. Connection

Before you configure the router yourself via a computer, you need to connect it:

• Insert the Internet cable into the WAN/Internet port;
• Install the end of the network cable into the LAN port of the device;
• Place the other end into the connector on the PC;
• Connect the model to a power outlet and press power on.
• Ready!

We hope that this brief instruction helped you understand the first steps, but you can read more about the connection process on the website. Now you can safely move on to the instructions, which tell you how to properly configure your WiFi router yourself.

#2. Login to the web interface

We would like to warn you that setting up a WiFi router online through a browser can only be done after turning on the device. When you activate the work, distribution of the wireless network with factory settings (login, password) will begin. You can change the router settings in a special web interface that each device is equipped with.

Important! To open the setup interface, you need to connect your computer to the device. Internet access is not required.

To open the site for setting up your router, do the following:

• Open your browser;
• Enter the IP address in the address bar;
• In the window that opens, log in - enter your username and password.

• The address, network name and login pin code are indicated on a sticker located on the back of the router.

• Some devices do not have login data - they need to be installed after logging into the interface.

Please note that some manufacturers set the parameters themselves - then you don’t need to do anything when you turn it on for the first time.

#3. Setup instructions

Most routers have a special wizard option that will help you quickly set the necessary parameters. For example, here, the item is called “Quick setup”:

The most important thing you need to configure is:

1. Internet connection;
2. Wi-Fi network.

Let's deal with the first parameter first. Our main goal is, of course, the operation of the Internet on devices:

• Open the General Settings tab. Most often they are located in the WAN or Internet section;
• Specify the provider connection type, username and password - you can see the information in the contract;

• If the provider requires MAC address binding, provide the required data (from the contract).

Important! If the provider uses (DHCP), then the connection to the network will occur automatically. Skip this section of the instructions; there is no need to reconfigure the router.

• Open the section called Wi-Fi. It may be called differently - Wireless network/Wireless/Wireless mode;
• In the “Network name” or “SSID” field, enter a new name (in Latin only);
• In the “Wireless network key” field, enter the created identification code;
• Security type – WPA2 – Personal;
• Change the region to the location in the appropriate line;
• Save your changes.

If you want to change your router settings, we recommend that you change the factory access code. This is important if you want to protect yourself from unauthorized entry. Here's how to do it:

• Find the security or privacy settings section;
• Change the data to a new, reliable code.

All of the above instructions apply if you need to set up a new router instead of an old one or install completely new equipment. By the way, we suggest you watch a general video on how to set up a router. It is perfect for those who are not confident in their abilities, because it shows the whole process step by step and in detail!

Now you know everything about how to set up the Internet on a Wi-Fi router via a computer - use our article to achieve results. Just follow the instructions and in just a few minutes you will be able to successfully surf the Internet.

The question of how to connect a wi-fi router to a computer is asked by users when they want to use the Internet throughout the apartment and have free access to the wi-fi network from several devices. In addition, they are interested in how many computers can be connected.

Installing and connecting a router is a simple process, which, however, requires careful adherence to the algorithm of actions.

Router installation

Installing a router can be done in two ways:

• via wireless network;
• using a twisted pair (a special wire that usually comes with the device).

The second method is less preferable. In order to make a connection, three main components are required:

1. Actually a wi-fi router;
2. A desktop computer or laptop with an installed network card;
3. Network cable.

Before purchasing a router, it is recommended to study the parameters of your own computers and other devices, since not all routers are compatible with all computers. Moreover, the older the laptop and/or software, the more difficult it is to find a compatible router.

ASUS routers are considered one of the most universal. ZyXEL also has good characteristics. Also, before purchasing, check the signal range of the device.

If you only need a Wi-Fi router to use the Internet from a phone or tablet at home, then inexpensive router models designed for 4–6 devices are quite suitable for you.

However, still pay attention to how many computers can be connected to the network at the same time.

Advice! Special requirements for the device should be made if you plan to create a powerful local home network for storing data. Also, when choosing, it is worth checking what speeds the device supports; they must be gigabyte. Otherwise, working on the Internet will become very difficult.

Wired connection

Connecting a router using twisted pair is quite simple, but with such a connection its operation becomes much more complicated.

In particular, you will not be able to move the computer away from it more than a certain distance. Therefore, this option is not applicable for laptops. But it may be a good solution if you have a desktop computer.

This wi-fi connection has its advantages. For example, it is believed that in this way the Internet causes fewer interruptions during operation.

• First, connect an Internet cable to the router.
  Find the WAN port on the back of the device and plug the cable into it. Then take the network cable and connect it to the router into the Ethernet port, and the other end into the corresponding port on the computer.

• Set up your router.
  Open any browser and enter the device’s IP address in the address bar. The address must be in the format http://192.168.0.1/. The true IP of the router can be found on the sticker on its bottom or in the technical documentation for the equipment.

After the IP is registered, the setup program will require you to enter your login and password. Then you can change the password for convenience. After this, the main wired network settings menu opens.

Important! If you are using a wired connection, then pay attention to the number of connectors in the router. How many there are - so many computers you can connect to the device.

Wireless connection

If you intend to connect your Wi-Fi router wirelessly, you will have to set up the connection in two stages. The first of them is the actual settings, and the second is work on network security.

• In the router menu, open the “Wi-Fi” tab, and there find a tab called “Manual settings settings”. The names of the tabs may vary depending on the type of router, but their meaning is usually obvious.

• In the main settings we find the SSID field. We write the network name in it. This is the name that you will see when connecting to the Internet from any device. Set the correct region in which the wi-fi network will work.
  Next, you need to select a channel for data transmission. It is better to leave the one indicated initially. However, over time it can be changed if problems arise with access to the Internet.

• Choose wi-fi standards. It is advisable to leave the mixed ones installed by default. Now choose how many network users can connect several computers to it at the same time.
  If the number of users should not be limited, select “0”.

• Go to the “Security” or “Security Settings” tab. In the field at the top, select the type of protection. WPA2-PSK will do. Enter the password in the “Key” field. Such measures will protect you from hacking and from those who like to use the Internet at someone else’s expense.
  Only someone who knows the password can connect the device to the network.

The advantage of this method is that you can use the Internet throughout the apartment. And, in addition, only with this type can you connect a second, third, or more computers located far from the device to the network.

Connecting a wired network is a little easier; it requires not so much additional work with security parameters as entering data that is not always at hand. Go to the “Network” tab in the router menu, and from there to the “Connections” tab.

Fill in the blank fields, if any. If all fields are filled in, confirm your selection.

Go to the “IP Settings” tab. Here you need to specify the LAN network address and subnet mask. This data must be specified in the contract for the provision of services by the provider. However, sometimes this data is not provided. In this case, you can call the provider's customer support.

There you will be required to provide this information. Confirm your selection by clicking the “Save” or “OK” button.

A wired network, although more secure, is not very convenient and does not allow you to connect the Internet to a second or even several computers. However, the choice of connection type depends solely on the user's needs.

How to connect a router to a computer

In order to connect the router to the computer, you need to connect a blue cable to one of the four blue sections. In the computer settings, the connection is configured in the Network and Sharing Center.