Trees may seem like some of the easiest subjects to draw. If you have never drawn, the task may be too simple...

...or too literal:

In none of the drawings do we see anything similar to real objects. The first is just a symbol of a tree, and the second suggests the definition of a tree. Your job as an artist is to paint what we see, not what we know. Drawing trees– a great exercise for developing this skill!

In this lesson I will show you, how to draw oak, pine and weeping willow simple and realistic method.

What you will need:

- Several sheets of paper;

— Hard pencil (HB);

— Pencil of medium softness (2B);

— Soft pencil (5B or less);

- Sharpener.

Usually a pair of hard pencils (HB) is enough, but this set is not universal for all drawings. To get dark shadows, we need soft pencils. There is no need to choose expensive ones - I bought the most common ones, and they perform their function perfectly. If you doubt whether you need to draw, then a set of pencils of different degrees of hardness will not be a big loss on your budget, and drawing with these is much easier!

You will also need a sharpener. A dull tip leaves lighter strokes and does not achieve the expected effect. Always keep your pencils sharp and remember that soft pencils wear out faster!

Regarding paper: it can be anything. Regular printer paper will also work. However, you should not draw on a whole sheet - than smaller figure, the less detail you will need to add. In reality, my drawings are about 9 cm in height.

Soft pencils help make shadows darker, which cannot be said about hard pencils. Hard pencils are not as dark, even if you press hard on them!

1. DRAWING AN OAK

Step 1

The brain works in an unusual way: first it grasps big picture and then pays attention to details. Therefore, you should not start drawing with details - you will need to create a base first.

Draw the general shape of the tree with a few faint strokes and dots. To do this, use a hard (HB) pencil, do not press on it. These strokes will not be part of the finished image - they will not be visible in the finished drawing; The camera and scanner don't recognize them (I used Photoshop so you can see them!).

Step 2

Draw the trunk. Don't forget - the lower part should expand downwards. The larger the tree, the shorter and thicker its trunk.

Step 3

Draw the branches at the top of the trunk.

Continue drawing the branches, gradually lowering the line as they lengthen.

Step 4

Add other branches to each branch (the longer, the lower they go). The strokes should be light.

Step 5

Using short, sharp strokes, draw the shape of the tree's crown. It doesn't have to be smooth and neat.

Step 6

Using the same method, draw small “clouds” of leaves inside the crown. Leave some areas empty so that parts of the branches are visible - this structure looks more interesting.

Step 7

Add thickness to the branches in places where they are not covered by leaves.

Step 8

Before you start applying shadows, determine which parts of the tree will be bright and which parts will have shadows. You can identify them by simple shading.

Step 9

Take a soft (2B) pencil (make sure it's sharp) and create texture on the trunk. Remember to also leave white areas - this is important for texture.

Step 10

Take soft pencils (2B and 5B) and darken the barrel according to the original light distribution plan. Don't be afraid to click on soft pencil to get the shadow you need, but don't overdo it! The fewer black areas in the picture, the more impressive it looks.

Step 11

Take hard pencil and sketch out the outlines of the leaves. Draw them in relaxed circles, quickly, with sharp movements.

Step 12

Each branch also has its own small crown (these are the “clouds” that you drew). They need to be shaded in the same way as if they were separate trees.

First, use a soft (2B) pencil to draw darker circles on the dark side. Don't press too hard at first so you can correct any mistakes.

Once you're sure you've got the dark sides right, add shadows and depth to them, and add some transition between the light and dark parts.

Step 13

Use a soft (2B) pencil to add some stray leaves throughout the crown and "little crowns." This will create the effect of additional, barely visible branches.

Step 14

Take the softest pencil and add some dark accents in the darkest places. The crown will be more contrasting. Also make sure that all leaves are darker than the “sky” background - leaves cannot be transparent! You can go over the lightest areas again with a hard pencil.

1. DRAWING A PINE

Step 1

Again, we start drawing with the general outline of the tree. Take a hard pencil and draw light lines.

Step 2

Draw the branches. Don't try to get them exactly right, just sketch them out.

Step 3

As with the oak tree, draw “clouds” on the branches. This time they should be narrower and even more uneven. Leave plenty of free space between them.

Step 4

Draw the outline of the trunk - long and narrow.

Step 5

Use a soft (2B) pencil to darken the barrel...

...and then a softer pencil to highlight the darkest side.

Step 6

This time there is no need to fill in the “clouds” with circles; fill them instead with sharp and chaotic strokes.

Step 7

Use a soft (2B) pencil to draw needles along the outline of the clouds. They should be thin and sharp.

Step 8

Draw the branches and darken them with two soft pencils.

Step 9

Draw even more needles inside the “clouds” with a soft (2B) pencil).

Step 10

Use the softest pencil to darken the clouds. If you want, you can simply darken them completely - evergreen trees are usually dark themselves.

Step 11

Finally, use your softest pencil to draw in the completely dark “clouds” between the branches.

1. DRAWING A WEEPING WILLOW

Step 1

We will draw according to the same scheme. Let's draw general outline willows are something like a fountain.

Step 2

Draw the outline of the trunk.

Step 3

Draw the branches away from the trunk...

... descending with length.

Step 4

Draw the outlines of the “clouds”; this time they will look more like curtains.

Step 5

Fill in the trunk and branches with shading using a soft (2B) pencil.

Step 6

Darken the trunk and branches with the softest pencil.

Step 7

Take a soft (2B) pencil and draw ribbon-like lines along the “curtains”. They should form an arc at the very beginning.

Step 8

Darken the "curtains" with darker and wider curling lines in the spaces.

Step 9

Use your softest pencil to draw dark “curtains” on the other, darkened side of the tree. You can also add leaves to the branches to make them more detailed.

Your trees are ready!

As you can see, draw trees- an easy task; you just need to pass them on appearance, not their definition. However, this is just the beginning of learning - if you want to become a real professional in drawing trees, take a notepad with you on your walk. Observe the trees you pass by and try to make them quick sketches. This way you can develop intuitive drawing. If you prefer to stay at home, look at photos of trees on the Internet.

Translation of an article from design.tutsplus.com.

Instructions

Start with the trunk that pine trees grow in the forest or on open space, straight and quite thin. Draw a very narrow and long rectangle in the middle of the landscape paper, tapering towards the top. In a field pine, the trunk can bifurcate in the first quarter from the ground.

Start drawing the branches growing from the pine tree almost perpendicular to the trunk. However, you should not depict branches with straight lines - it looks unnatural. Draw broken lines, whimsically curved lines and do not forget to divide a large branch into several small ones as it moves away from the trunk. Remember that a pine tree grown in the forest is very different from a field pine - the latter has a dense crown starting one and a half to two meters from the ground, and in a forest pine most of the trunk is devoid of branches.

Place branches not only on the sides of the trunk, but also on the back and front. The branches located directly in front of the trunk will appear the shortest and at the same time the densest, and the branches at the back need not be drawn in detail, limiting themselves to shading with a pencil. Also note that the pine branches become shorter and thinner as they approach the top of the tree.

Draw the pine needles. Using confident pencil strokes, go over the ends of the branches, making the tree “fluffy.” Branches that are far from the viewer do not need to be drawn in too much detail - the needles can simply be indicated by shading. An old tree may have lower branches that are dry and bare or broken.

Add shadows. Try to place them correctly in one direction, focusing on an imaginary light source. By using deeper shading on the sides of the trunk, you can show its cylindrical shape. Shadows from the branches will add expressiveness to the picture.

Video on the topic

Useful advice

Note the individual characteristics of trees: a broken branch, a hollow, a bird's nest. Such details will make your drawing more realistic and interesting.

Sources:

• how to draw a pine tree step by step

When creating cartoon drawings the artist is faced with the need to paint nature so that it looks at the same time quite natural and at the same time does not stand out from the general plan. You can draw tree bark using Photoshop, even if you do not fully master all the tools.

You will need

• - Photoshop program;
• - photo of a tree.

Instructions

Create a new document in Photoshop program. Select a standard round brush (size 40 px, opacity 40%) and paint the trunk, making many long strokes. At the same time, change the pressure on the pen to get a slight “striation”. If necessary, make branches; the strokes should extend slightly into the trunk.

On the side where the sun will be, make a few strokes with a lighter brush (of the same shade), and on the opposite side darken the trunk a little. At the very edge dark side You can draw the darkest strokes - use photographs of real trees as a guide.

Create a new layer for the fibers. Using an opaque round brush (size 8 px), paint the wood fibers in the form of a rhombic network. The color you need is the darkest one used previously. Select the optimal transparency using the Soft Light blending mode.

On the same layer, using a 4 px brush with 60% transparency, fill each cell of the network with fine shading. Try to ensure that the shading in adjacent fibers is consistent. different directions. You can add a few cracks between the fibers.

Trees are almost always the most striking and characteristic indicator of those geographical conditions, which are characteristic of a particular area. Therefore, it is natural that the artist should approach vegetation with special attention, and his sketches should be made especially carefully. So, for example, if he draws a pine tree, then there should be a pine tree in his drawing, and not just a tree. Let's talk how to draw trees with a pencil. We draw trees with a pencil. Trees do not always have such characteristic appearance, which a pine tree has. Nevertheless, many trees have a fairly typical appearance. The most characteristic trees of our forests are coniferous spruce, pine and larch, and from deciduous birch, oak, partly linden. From the south - pyramidal poplar, cypress, palm trees and some others. It is these, the most typical trees, that we will first get acquainted with. Children very often draw trees. And the question of how to draw trees with a pencil appeared for many people back in school or kindergarten.

How to draw a Christmas tree (spruce)

Spruce is so characteristic that it is easily remembered and depicted even by children preschool age(Fig. 1). Figure 1 - Spruce in the image of children Before you find out how to draw a Christmas tree, you need to find out what is characteristic about this tree? A tall, upright trunk, a whorled arrangement of branches, with the whorls of branches going almost from the base to the very top, the branches are densely covered with needles. All this is arranged in a certain regular order. The branches of the upper whorls are short, thin, and stick out to the sides and even slightly upward. The lower whorls consist of heavy branching, rather long rays, which, due to their gravity, hang down. A little later we will look at how to draw deciduous trees with a pencil.

Examples of drawing spruce

Figure 2 - Developed and undeveloped “whorls” of young spruce Speaking about character drawing of a young spruce, we must remind you of one more detail. Every year a new whorl grows from above. But not every whorl is preserved. Usually the stronger ones survive and suppress the nearest, lower whorls. As a result, quite large distances are obtained between the preserved whorls. From the dead whorls, only traces remain in the form of dried and broken branches. To draw a spruce, it is these features that need to be depicted. Figure 3 - Simplified drawing of an adult spruce Look at Figure 2 to see how a young spruce is drawn. The rays of its whorls are still light, and they hardly hang down. Drawing an adult Christmas tree a little different. Heavy lower branches (paws) hang almost to the ground (Fig. 3). If we do not know the nature of the structure of the trunk, the nature of the branching of the whorls, then we will not be able to correctly depict the spruce. Any person who hardly knows how to draw will draw a spruce if he only understands the nature of the structure of the whorls of the trunks. Thus, before drawing a spruce, you need to become familiar with the “anatomy” of the spruce. This is easily achieved if we think through and first draw a simplified diagram of the “skeleton” of a tree (Fig. 4), then a young spruce (Fig. 5) and, finally, an adult spruce (Fig. 3). Figure 4 - Skeleton of a young spruce Figure 5 - A more mature spruce When the spruce is detailed, you can move on to drawing spruce trees and a spruce forest from a distance. (We need these exercises so that later, when depicting landscapes, we do not need to think about how to draw a spruce, how to draw a spruce forest and in the distance, and near, and on the plain, and on the mountain slopes.)

Drawing a spruce forest

Spruce forests, even from a distance, do not lose their external features. They are distinguished by their sharp-toothed top. We are no longer talking about the characteristic blue velvet tone that spruce forest differs sharply from other forests located at the same distant distance. Of course, we do not yet set ourselves the transfer of tone, but we will have to depict the transfer of the character of the mass of the spruce forest (Fig. 6). Figure 6 - Drawing Christmas trees at different distances When drawing a Christmas tree, you have to use shading. Distant trees, in which details cannot be made out, can be covered with a simple stroke, the farthest ones - with vertical strokes. Each such stroke should, as it were, emphasize the character of tall and relatively narrow trees. On nearby spruce trees, not only large whorl branches are clearly visible, but also small, usually hanging down, branches, densely covered with needles. We cannot draw such details, but through vertical shading we can convey the character of these hanging branches (Fig. 3). It is clear that here the strokes in different parts of the spruce are not the same. On the lower branches they can be thicker and longer, and on the upper branches thinner and shorter. It is more convenient to make these drawings in pencil at first.

How to draw a pine tree

Pine, like spruce, is a conifer, but there is a huge difference between pine and spruce. Spruce is shade-loving. It can grow in deep forests in conditions of almost twilight lighting. Pine, on the contrary, in highest degree photophilous. Pine tolerates rocky soil, sand, and lack of moisture, but dies with a lack of light. Thus, pine and spruce have completely different attitudes to light, and hence the different appearance, therefore, there is a difference in how to draw a pine tree. Young pines, growing in an open place, are generally similar to spruce, only the rays of the whorls are spaced less frequently and the needles are longer. The sparse arrangement of branches is already a consequence of the light-loving nature. As they grow, the lower branches, darkened by the upper ones, die off. And the upper branches, in the struggle for light, develop very unevenly. Strongly developed individual rays of whorls turn into thick branches that grow into wide umbrellas. The weak rays of the whorls perish. We see the remains of these dead branches on any pine tree. As a result of the struggle for light, the character of the crown changes so much that mature pine no longer resembles spruce in any way, and even the whorled arrangement of branches becomes barely noticeable (Fig. 7). Figure 7 - How to draw a pine tree: on the left - a pine tree growing in an open place, on the right - simplified silhouettes of pine trees Having understood the characteristic ones, we better understand how to draw a pine tree. First, we will deliberately make the most simplified drawings, in which all the most characteristic features(Fig. 7). It is very useful to look at separately growing pines in nature, and then at pines in the forest. It is also useful to look at paintings by artists. In paintings of a painted pine tree, everything that is most characteristic is usually expressed.

Drawing a pine tree in the forest

So far we have talked about pine trees growing in open areas. Conditions are different in the forest. There the pine tree fights with neighboring pines. The fight for light leads to rapid growth up some pines and the death of others that are lagging behind in their growth. As a result, the pine trees in the forest have a cylindrical tall trunk, almost devoid of branches, and a dense top. In a pine forest you can always see trees that are different in their vitality. Some have tall and, compared to others, thick trunks, with a richly developed crown rising above the neighboring crowns. These are the “dominant” trees. Nearby there may be weaker pines with a thin but also tall trunk and a less developed crown. Finally, there will also be pines with very thin trunks and a poorly developed crown that cannot spread out into the open space. These are “oppressed” trees, dying or completely dead, devoid of green needles (Fig. 8). Figure 8 - Pine in the forest: A- "dominant" b And V- oppressed, G- dead.

Drawing a pine forest

Just as we drew a fir tree (first close, then in the distance, then moving on to groups of fir trees and spruce forest), we will also draw pine trees. As you move away from the viewer, the outline of the pine tree becomes simpler, and, finally, the pine tree takes on a form that is close to the conventional pine tree icon used on profiles and some maps (Fig. 9). A group of pines or a pine forest from a distance appears as a dark mass, which on top has irregular, sparsely spaced, rounded teeth of various sizes. Below, if there is no edge, vertical trunks are clearly visible. It is most convenient to convey these trunks with vertical strokes (Fig. 10). In general, it must be said that when drawing pine forest and individual pines have the character of strokes great value. However, due to the characteristic nature of the pine crown, you can successfully use ordinary strokes. Figure 9 - Near and distant pines Pines in different areas are not the same. Thus, pine in the taiga zone is very different from Crimean pine. The shapes of pine trees in Mediterranean countries and Japan differ even more. The latter have a more developed crown width, which gives the pine the appearance of an umbrella with a flatter top. They also differ depending on the conditions in which they are found. Thus, free-standing pines in open areas have a thicker trunk, powerful branches and a richly developed crown (Fig. 7). Pines of mountain gorges, on the contrary, have unusually tall and relatively thin trunks with a small crown at the top (Fig. 11). Figure 10 - Drawing a pine forest in the distance Figure 11 - Trees in deep gorges, where there are weak winds and little rainfall. Tree trunks are unusually elongated in height (Altai).

How to draw larch

Larch is especially characteristic of the taiga zone of Siberia. But it is often found within our European territory. Larch differs from other conifers in that it loses its needles during the winter. The last circumstance in a known way reflected in her appearance. In winter, larch does not have needles - this is already one of its features. Larch branches devoid of needles do not hold snow. Hence, the branches, devoid of needles and snow, even with their small thickness, very rarely bend downwards, as we saw with spruce, but more often stick out freely to the sides and in the upper parts of the tree even bend upward (Fig. 12). Figure 12 - Simplified “larch skeleton”. Larch has a tall, upright trunk and a peculiar whorled branching, which is sharply different from spruce and fir. Let us give, as an example, several sketches of larches made in winter (Fig. 13 and 14). Larches located at a distance retain their character well (Fig. 15). Figure 13 - Simplified image of an adult and old larch in winter. Figure 14 - Simplified drawing of a larch forest in winter Larch trees are characterized by a light, bright green color in summer, very pleasing to the eye, soft yellow or silvery yellow in late autumn and a peculiar green haze in spring. Figure 15 - Highly simplified image of distant larches

How to draw a birch

White bark, peculiar branching and especially hanging thin branches are very characteristic features our birch. Examining the branching of a birch tree, we immediately notice rather thick branches extending from the trunk, at sharp angles, which similarly branch further, turning into thin and unusually long terminal branches. This structure of the branches is what causes them to droop. And the overhanging branches largely determine the unique appearance of the birch tree, which we all know so well. Note that when drawing a birch just as in other cases, the most important thing is building the base of the tree: trunk, branching, the nature of the final thin branches and, finally, the foliage (Fig. 15 and 16). Figure 15 - Simplified drawing of a birch without leaves and with leaves
Figure 16 - A row of gradually receding birch trees.

Drawing trees: aspen and poplar

Aspen, growing in areas of forest fires and clearings, is distinguished by a thin, high, upright trunk and thin branches extending from the trunk successively, most often at an angle of 30-40° (Fig. 17). The thin branches of the aspen do not droop, the outline of the crown is simple, in the form of a lancet blade. There are also other forms of aspens with a powerful trunk and thick branches. This form is quite close to our usual poplar (Fig. 17).
Figure 17 - Left: We draw a young aspen without leaves and with leaves. Right: Branching pattern and crown outline of a common poplar As we see, the question is: how to draw trees with a pencil, is not clear. Let's look at how to draw a tree like this Lombardy poplar. It is very typical for our southern regions, especially for the steppe areas. It grows in small groups near rivers and other bodies of water and is especially common near dwellings. The appearance of poplar is very typical. It is determined by the presence of a tall, upright trunk and a kind of branching, as shown in Figure 18. Figure 18 - Pyramid poplar without leaves and with leaves

How to draw a tree with a pencil: linden

The appearance of linden is such that it can be confused from a distance with some other deciduous tree species. Nevertheless, linden also has its own characteristics, which are easy to notice when comparing, for example, with. poplar or oak. Linden is characterized by the division of the trunk into thick large branches, which most often extend from the trunk at sharp angles. The branches reach a great length, branching densely towards the end. This dense branching leads to increased weight of the terminal parts, which in turn leads to some drooping of the apical branches. The overhang is significantly less than that of birch, but more than that of poplar and oak (Fig. 19). Figure 19 - Drawing a linden tree From a distance, linden groves and forests are distinguished by the soft rounded outlines of their crowns, reminiscent of the tops of cumulus clouds. Let's look at how to draw trees like oak with a pencil.

How to draw an oak tree

The oak tree has a different character with its strong and slightly bendable branches. Unlike drawing a tree such as linden, poplar and some other broad-leaved tree species, oak branches extend from the trunk at angles close to right. The branches of the second and third order also roughly extend out (Fig. 20). The branches are distinguished by their thickness, knobbiness and dense pubescence at the ends (the pubescence consists of thin branches and dense foliage). This peculiar branching pattern is observed not only on large mature trees, but also on young ones (Fig. 20). General outline The crown partly resembles the outline of an oak leaf, but with secondary, pronounced serration (Fig. 21). In general, the appearance of oak expresses the inflexibility and strength of a mighty tree. No wonder oak is a symbol of resilience and strength.
Figure 20 - How to draw an oak tree correctly: Left: Simplified image of an oak tree without leaves and with leaves; Right: Young oaks without leaves Oak trees in the forest have a more elongated upward shape, but the main features remain approximately the same.
Figure 21 - Outline of an Oak Tree Without being able to dwell on the characteristics of our other less common or less characteristic trees, we will touch very briefly on some of the most typical southern trees with which we often encounter. This should include cypresses, palms, baobab and some others.

Drawing a cypress

Cypress A very typical plant for Mediterranean countries, it is also widespread as an ornamental plant along the southern coast of Crimea. Strongly elongated upward, narrow, slender, with a sharp top, the cypress is easily conveyed in the drawing. Its strong upward elongation is due to the large height of the trunk and characteristic branching (Fig. 22). Figure 22 - Cypress trees and a diagram of their trunks and branching patterns

How to draw a palm tree

How to draw a tree like a palm tree is also of interest. Palm trees are different, but they are characterized by the absence of branching and the frond emerging from approximately one point. The correct representation of the shape and character of the palm tree primarily depends on the correct depiction of this frond exiting from one point. The general appearance of the crown is round and often easily fits into a circle (Fig. 23). It should be remembered that the upper fronds are the youngest, they stick up, and the lower ones are the oldest, they hang down and die.
Figure 23 - Left: Drawing a coconut tree; Right: Drawing a date palm. The trunk of a palm tree is most often slightly curved in its upper part. The date palm has a slightly different character.

How to draw a baobab tree with a pencil

Very interesting for drawing baobab tree. The baobab has a very characteristic trunk, branching and crown. The baobab tree is characterized by a very thick and, compared to its height, short trunk. The height of the trunk before branching begins is usually only 2.5-3 times its thickness. The trunk at a certain height immediately begins to divide into 5-7 (rarely more) thick branches. These main branches immediately begin to branch and very quickly lose their thickness. Unlike a cylindrical trunk, they have a conical shape. The baobab has a dense and very wide crown (Fig. 24). Figure 24 - Baobab without leaves A similar crown shape, however, is typical for most savannah trees. Only the latter have usually thinner trunks and a relatively wider crown. The shape of their crown resembles an umbrella (Fig. 25). Figure 25 - Savannah acacias

/ Nature

Learn to draw a pine tree step by step with STABILO Trio A-Z colored markers.

Felt pens with a triangular grip area and a fine tip. For right-handers and left-handers.

The ergonomic shape of the grip zone develops the skill of holding a writing instrument correctly and prevents hand fatigue even during long-term work. The body of the felt-tip pens is decorated with the Latin alphabet and funny drawings; they will help in learning to draw and write.

STABILO Trio A-Z markers - owners German sign quality for toys, which confirms their highest quality and health safety.

Line thickness 0.7 mm. Ventilated cap. Water-based ink is non-toxic, odorless, and can be easily washed off any type of fabric and washed off hands.

We will draw the pine tree using STABILO felt-tip pens on drawing paper.

Felt-tip pen brown outline the pine trunk with two vertical lines, converging at the top into one line.

Using the same brown felt-tip pen, we draw horizontal branches above the middle height of the trunk. From above, the branches decrease in length and form a rounded crown.

Using a brown felt-tip pen, add small branches closer to the edge. All ends of the branches are directed upward. Shading the trunk.

Shade the needles with short strokes from the branches upward green. Forming separate groups needles in the crown.

We go through the upper needles with strokes of light green color. We form a crown pattern in the form of a semicircle.

Use a brown felt-tip pen to shade the lower part of the pine trunk. Then we refine the drawing of the trunk and branches with a black felt-tip pen.

When an adult or child wants to try themselves as an artist, questions often arise. Often people prefer to start showing their talent with drawings of nature. At such moments, the question may arise about how to draw pine trees, birches, chestnuts and other trees. Regardless of what time of year a person plans to depict, evergreen trees - pine trees - can always be present in the picture.

What materials will be needed to draw a pine tree?

In order to fully prepare for drawing pine trees, you need to have the following materials on hand:

• a sheet of paper or album;
• several pencils;
• sharpener;
• eraser;
• sample image.

If all the materials are ready, before you draw the pine trees, you need to think about the overall composition of the drawing. This will help you gain motivation and create a real masterpiece.

How to paint pine trees with paints?

If a child wants to try himself as an artist, mothers, fathers, and grandparents need to be ready to tell their child all the nuances. The sequence of actions should be as follows:

1. To begin with, the child must imagine the finished image in his imagination.
2. Then you should make a sketch by drawing with a simple pencil future pines.
3. After this you need to make the drawing clearer.
4. Then you can start coloring work of art paints.

Even if the child did not succeed very well the first time, he should be praised for his efforts. Next time everything will definitely work out. And if the drawing came out decent enough, then you should put it in a frame and hang it in the room.

How to draw a pine tree with a pencil?

Adults or children with experience in artistic arts will definitely want to draw a pine tree with a pencil. Before you draw pine trees, you should understand in what order you need to do the work. To get good drawing, follows:

1. Determine the location of the pine tree in the image.
2. Then draw the outlines of the trees.
3. Draw a picture of a trunk on a piece of paper.
4. Then draw the branches.
5. Draw needles on the branches.

In any case, even if the image did not turn out the way you originally wanted, you should try to draw again. Only the persistent manage to achieve high results.

Drawing a pine tree is not that difficult. It's enough just to pay attention to details. Those people who strive to achieve their goals will certainly succeed, and the drawings will be no worse than real works of famous artists.