How to draw straight lines. How to draw a line in Photoshop

21.04.2019

Lines, as well as other geometric elements, are an integral part of the work of a Photoshop master. Lines are used to create grids, contours, and segments. various shapes, skeletons of complex objects are built.

Today's article will be entirely devoted to how you can create lines in Photoshop.

As we know from the school geometry course, lines can be straight, broken and curved.

Straight

To create a straight line in Photoshop, there are several options using various tools. All the main construction methods are given in one of the existing lessons.

Therefore, we will not linger in this section, but will immediately move on to the next one.

Broken

A polyline consists of several straight segments, and can be closed, forming a polygon. Based on this, there are a couple of ways to build it.

Unclosed polyline

Closed polyline

As we said earlier, such a line is a polygon. There are two ways to construct polygons - using the appropriate tool from the group "Figure", or by creating a selection free form followed by a stroke.

Figure.
When using this method we get a geometric figure with equal angles and sides.

To obtain a line (contour) directly, you need to adjust the stroke, called "Stroke". In our case, it will be a solid stroke of a given size and color.

After disabling the fill

we will get the required result.

Such a figure can be deformed and rotated using the same "Free Transformation".
Straight-line lasso.

Using this tool you can build polygons of any configuration. After placing several points, a selected area is created.

This selection needs to be circled, for which there is a corresponding function that is called by pressing RMB on the canvas.

In the settings you can choose the color, size and position of the stroke.

Curve

Curves have the same parameters as broken lines, that is, they can be closed or open. You can draw a curved line in several ways: with tools "Feather" And "Lasso" using shapes or selections.

Unclosed

Such a line can only be drawn "Per"(with a contour outline), or “by hand”. In the first case, the lesson, the link to which is above, will help us, and in the second, only a steady hand.

Closed

Lasso.

This tool allows you to draw closed curves of any shape (segments). Lasso creates a selection, which, to obtain a line, must be outlined in a known way.
Oval area.

In this case, the result of our actions will be a circle of regular or elliptical shape.

To deform it, it is enough to call "Free Transform" (CTRL+T) and, after pressing RMB, select the appropriate additional function.

On the grid that appears, we will see markers, by pulling which you can achieve the desired result.

It is worth noting that in this case the effect also extends to the line thickness.
Figure.
Let's use the tool "Ellipse" and, using the settings described above (as for a polygon), create a circle.

After deformation we get the following result:

As you can see, the line thickness remained unchanged.

This concludes the lesson on creating lines in Photoshop. We learned how to create straight, broken and curved lines different ways using various program tools.

These skills should not be neglected, since they are the ones that help build geometric figures, contours, various meshes and frames in Photoshop.

The Photoshop graphics editor is rightly considered a fairly complex program. He has a large number of tools, and therefore is able to perform many tasks. Well, in order to understand all its nuances, you need to make every effort, spend a lot of time and, of course, have a great desire, otherwise nothing will work out.

Of course, not all teams are within the capabilities of a beginner, for example, but this is only at first. But you have to start somewhere! I suggest starting with something simple, but at the same time very the right lesson: how to draw a straight line in Photoshop. So, let's figure it out.

Brush and Pencil tools

There are several ways to draw a regular straight line in Photoshop, it all depends solely on the user’s preferences. By the way, there are also several ways. To begin with, I would like to introduce you to the tools that are not the most obvious for these purposes: “Brush” and “Pencil”.

Please note that if you hold down the key before drawing, the line will not turn out strictly straight, so do not forget to perform this simple action.

Line Tool

This method of creating a straight line is perhaps very obvious and lies on the surface, and, nevertheless, beginners may not know about it. The point is that this tool is part of a group of others called by the U button on the keyboard. You can also call it manually; to do this, on the vertical Panel, click on the “Rectangle” button with the right mouse button.

A small menu will appear with a list of possible tools, including the one we need – “Line”. Click on it, and then adjust the header with customizable parameters, for example, you can adjust the line thickness. Now let's start drawing: to do this, just drag computer mouse

to the side while holding its left button. If you press in parallel, you will get a vertical or horizontal line. Also, if you hold down the same key and drag a line along an inclined line, the line will accordingly be inclined at an angle of 45 degrees.

That's all science, as you can see, absolutely nothing complicated! Patience, a little practice, and you will succeed. Hello, dear readers
! In this lesson you will learn how to draw a line in Photoshop

Create a new document in Photoshop (Ctrl + N) with a white background. The easiest tool for drawing straight lines is the Line Tool (U). In addition to standard modes vector tools
On the top panel there is a parameter Thickness (Width). He is responsible for the thickness of the line. To create a line, drag the mouse to the side while holding the left button. If you hold down the Shift key, you can get horizontal or vertical line
. If you drag a line along an angle while holding Shift, it will be inclined at an angle of 45 degrees.

This is how straight vector lines are drawn.
You can also use the Brush Tool (B) to draw lines. Select it, right-click on the canvas and set the Size to 1 pixel so that the lines are thin. As in the first case, you need to hold down the Shift key to draw straight lines.

You can also draw lines from points. Make a single click on the canvas at the starting point. Hold down the Shift key and click on the next point (where the end of the line should be), then on another one if you want to create a polyline. But what if you need to draw wavy line ? To do this, you can use a combination of the Pen tools ( Pen Tool
) (P) and Brush Tool (B). Photoshop has a stroke feature.

With this tool, lines are drawn using single clicks. Draw a simple line in two clicks.

Hover your cursor over the line and a “+” sign will appear next to it.

Pull the line down and it will curve. Another anchor point will appear on the line. Using the Direct Selection Tool (A), you can change the curvature of the lines using the levers. To quickly switch to this tool, press the Ctrl key while the Pen Tool (P) is active.

Now you need to select a brush that will be used to outline the outline. Select the Brush Tool (B), set the size to 2 pixels and lower the Hardness to 0%.

Select the Pen Tool (P) again, right-click on the canvas and select Stroke Path.

In the window that appears, select Brush. If you turn on the Simulate Pressure function, the edges of the line will taper.

Press Enter to remove the outline.

The stroke could have been made more in a fast way. After setting up the brush, do not switch to the Pen Tool (P), but press Enter to stroke. Pressing this key multiple times will repeat the stroke. To remove the outline, press Delete.

This concludes the lesson. Now you know how to draw a line in Photoshop.

How to draw a straight line in Photoshop?

It's not difficult to draw a straight line in Photoshop.

You can simply hold down the Shift key while taking a pencil or brush. Then the line will be smooth with a fixed point.

Or using a rectangular area if a thick line is required.

You put a point with a pencil without pressing Shift, then press Shift and put a second point. A straight line will appear between these two points.

I recently needed to do this, I couldn’t find the function, but I figured out to hold down the Shift key and just draw with a pencil (or brush). A straight line is drawn, but only either strictly horizontally or vertically (no obliquely). Although, in principle, if you need it obliquely, you can rotate the line.

PS. I'm still an amateur in Photoshop, so maybe there are some special tools for drawing a straight line that I'm not aware of

To draw a line, you need to select a tool in Photoshop from the very top called Rectangular Marquee and draw a line of the desired thickness and length. Next, you need to paint over it with tools like Gradient, Pencil or Fill...

The hotkey U at the top of the toolbar will be a line.

You select a brush, color, put a point where you want to start the line, then press Shift and without releasing it, put a point where you want to finish the line.

2 days before entering the program, refrain from drinking alcoholic beverages and intoxicating drugs.

- Select the brush tool.
- We set it up in such a way that any dynamics of shape and size are turned off.
- hold down Shift and draw up/down or left/right, depending on where you want to draw the line. If you draw in a new layer, you can then rotate it to the desired angle with the transform tool - Ctrl+T

In order to draw a straight line in Photoshop, we just need to use a pencil in this program to press the left click and without releasing the Shift button. After this, we point the mouse in the direction we need and we get a straight line.

There is nothing difficult here)

I wish you good luck with your drawing in Photoshop.

As I remember, you can draw a straight line in Photoshop by pressing and holding the Shift key and at the same time selecting a brush or pencil and then drawing your straight line, but you can draw either vertically or horizontally..

For example, when I need to draw a straight line in Photoshop, I simply take a pencil or brush in the program, then put a dot in the required place and, without releasing it, press Shift and draw my straight line in the required direction.

How to draw a line in Photoshop

If you take the Rectangular Marquee Tool, you can easily make a thin horizontal selection in the form of a line, which can be filled with some color (Edit -> Fill...).

There are quite a lot of different questions on Photoshop on BV. For example:
- How to whiten teeth in Photoshop?

Draw a straight line in the program Adobe Photoshop It's not difficult at all. First, you need to choose a brush or pencil (if you need thin line, That better pencil, if it is thick with a shaded border, then select the appropriate brush), set the desired thickness and color. And then, holding down the Shift key, draw a line. It will turn out perfectly smooth.

Parallel lines and a grid are elements that bring order and rigid structure to a design solution. Lines set the direction for the eye as it fleetingly glides across the picture, emphasizing the surfaces, giving volume to the image. Light shading instead of filling creates the effect of weightlessness and airiness of the object.

It is easier to create parallel lines, a grid of rectangular cells, and a lattice in vector graphics programs such as Adobe Illustrator, for example. You can download a suitable texture or ready-made clipart.

But there is not always time to look for the right textures. Drawing a straight line is easy - draw with any drawing tool while holding down the Shift key. It's difficult to draw multiple lines equally spaced to create a grid, for example. But solving the problem of creating parallel lines in Photoshop is not at all difficult.

1 way.

The fastest way to create parallel lines is to use styles.

Draw a straight line with the Pensil tool (to make the line straight, hold down the Shft key).

Photoshop's built-in styles include Dotted Strokes styles. Select these styles using the Styles palette menu: Window > Styles.

From the style sets, choose the White 1pt 2pt-Spaced Dotted No Fill style or another one if you prefer.

Let's get a line of points.

This line needs to be stretched in width and obtained from the points of the strip. But if you do this right now, you will get a rectangle with a dotted outline. Here's a simple trick: create a new empty layer above the dotted line layer and merge the two layers (select these layers in the Layers panel and do the Merge command).

After that, simply stretch the line wider with the command Edit (Editing)>Transform (Transform).

If you create a new layer above the layer with lines, fill this layer with a gradient fill and apply the menu command from the layers panel Create Clipping Mask to it, you will get this rainbow stripe.

And using the Edit > Transform > Warp command allows you to get interesting effects.

Method 2.

Parallel lines can be created using gradients. The disadvantage of this method is significant - you must first create a gradient using the gradient editor. If you don’t know anything about working with the gradient editor, go here:

The advantage of this method is that, firstly, you can create a striped gradient, save it and use it always, secondly, you can create multi-colored gradients, gradients with blurry or clear transitions from the line color to the background, you can create double, triple lines with different spaces between them. Or download ready-made ones or

Creating a gradient to draw parallel lines is easy. Open the gradient editor and add color markers in the desired positions (just click the mouse in the right places, set the color and distance in the appropriate fields.). The Location field specifies the marker indentation in % from the left edge; the distance between markers is the distance between lines.

Small markers next to the color marker determine how blurry the line is. Try moving them closer to the line and see the result.

The markers above the gradient bar control the transparency of the gradient areas. White markers indicate transparent areas (Opacity is 0). This gradient is convenient for drawing on a ready-made background:

An example of using this gradient:

And don’t forget that there are different gradients - diamond-shaped, radial, mirror, which allows you to create different shapes with one easy movement:

3 way.

To start, draw one line on a new layer.

Go to the Actions palette, create new operation(Line, for example), click the record button and do simple steps: Duplicate the line layer and move it up or down to the desired distance. The job is done, click the Stop Recording button. It should look something like this: